Deck by Map73Icom ID-series handheld, live in the browser
-- VFO Squelch open TX Off air

Connect your radio to see it here.

SignalS0
13579+20+40+60
Last minute
Mode
Step
Off

Band sweep

The radio has no band scope over CI-V, so this steps through a range and reads the S-meter at each point.

Station IDs

Call signs decoded from repeaters' Morse IDs show up here, with the frequency they were heard on, and label those frequencies everywhere in the panel. Turn on Decode Morse on the main panel, under the frequency, or sweep with Stop on signal, then identify.

APRS

Turn on Decode APRS on the main panel, under the frequency and tune 144.800 (or 145.825 while the ISS is over). Packets are decoded straight from the radio's audio, with no TNC.

Send a beacon or message
PositionNot set
Sends on–

Sending needs a cable from this computer's audio output into the radio's mic input, with VOX off, and a licence for the frequency. The radio transmits on the main band for about a second, then goes back to receive.

D-STAR

Calls heard in DV mode show up here: who is calling, through which repeater, their message, and their D-PRS position, which also goes on the APRS radar. Tune a D-STAR repeater, or 145.375 simplex, in DV.

My call sign and routing

The routing buttons fill UR, R1 and R2 and save them to the radio; then transmit with PTT in DV mode. Link, unlink, echo and info are commands to the repeater's gateway: key up briefly and it acts on them.

Satellites

Azimuth
–
Elevation
–
Range
–
Doppler
–
Tune to
–
    Your locationNot set

    Downlink Doppler only: the radio can't shift its transmit frequency separately.

    SSTV pictures

    Turn on Decode SSTV and tune 145.800 while the ISS is over during an ARISS SSTV event (announced on ariss.org; usually PD120, a picture every few minutes): pick ISS voice / SSTV above and Track & tune keeps the Doppler shift out. A picture draws as it comes in and is kept here when it ends.

    Channels & memories

    Saved channels and memories are picked on each band card of the display: ‹ › step through them and the channel name opens the list. The radio can't send its memories over CI-V, so import them once: export the memory channels to CSV from the radio's SD card menu or Icom's cloning software, then choose the file or drop it here. CHIRP CSV files work too.